Products

Products

PP Melt Blown Filter Cartridge

Description


  1. MELKO MKPP SERIES 4.5” DIAMETER CARTRIDGES
    Our 4.5”diameter MKPP Series Cartridges have true multi-stage depth filtration integrated into their design. Utilizing four separate layers of micron filtration, outside-in flow allows the outer layer to trap the larger sized particle,resulting in a much lower pressure drop compared to conventional filters. Trapping various sized particles layer-by-layer, our MKPP series Cartridge provide a much higher dirt holding capacity than standard spun polypropylene and string wound cartridges.

    SPECIFICATION:
    Filter Media:  Polypropylene
    Nominal Micron Rating: 0.5,1,5,10,20,30,50,75,100μm
    Filter Length:  5” 10” 20” 30” 40” 50”
    O.D.:  2.5” 4.5”
    I.D. :  14mm 20mm 28mm 30mm 34mm
    Surface:  Plain, Grooved, Light-grooved,Orange, Dot
    *Note: Special lengths and diameters available.

    OPERATION DATA:
    Max. Operating temperature: 145℉(63℃)
    Max. Pressure drop:  69℉(20℃)46.4psi(3.2kg/cm2)
    Recommended replaceable pressure drop: 21.75psi(1.5kg/cm2)
    Temperature Range: 40℉ to 145℉(4.4℃ to 62.8℃)
    Maximum flow:  2-8GPM(Depending on micron rating)
    *Warning: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

    APPLICATIONS
    Electroplating,etching,and image developing processes in PCB Industry
    Filtration for electroplating industry
    Pre-filter for DI and RO water filtration systems
    Pre-filtration for low viscosity chemicals
    Pre-filtration for manufacturing